3-D finite deformation thermo-mech displacement element

[Yaakov]

Dear FEAP Team & Users,

how could I use 3-D finite deformation thermo-mech displacement element in FEAP?

I used following commands:

MATErial 1
  SOLID
    FINI
    ELASTIC NEOH  100    0.4995
    THERMAL ISOTROPIC  0.25   0.0
    FOURIER ISOTROPIC  10.0   1.0
    DENSITY MASS       0.10
    MIXED

It shows me thermal analysis results.

Best Regards,
Yaakov

[Prof. S. Govindjee]

The manual seems to indicate that this feature is only available for the small strain elements.  You will have to program it yourself for the finite deformation case.

[Yaakov]

Dear Prof. Govindjee,
Thanks very much for your answer! Is It possible that I could develop code " fld3d1tm.f "  for the finite deformation case (e.g. NEHOOKEAN)?