Author Topic: parabolic distributed force on nodes  (Read 7717 times)

ROMU

  • New Member
  • *
  • Posts: 1
parabolic distributed force on nodes
« on: June 17, 2021, 12:38:52 AM »
hello everyone, I am a structural engineering student in Italy. My professor asked me to model a cantilevered deep beam problem (lenght/hight=3, or disk) in FEAPpv with a load applied to the free end with parabolic distribution. For istance I divide my  disk in many rectangles (rectangular mesh) .HOW should I apply the shear forces on the nodes using the E-force command.

Sorry for my english

Prof. R.L. Taylor

  • Administrator
  • FEAP Guru
  • *****
  • Posts: 2647
Re: parabolic distributed force on nodes
« Reply #1 on: June 17, 2021, 07:46:03 AM »
You should use the CSURf command.  See section 5.7 of manual_51 for FEAPpv.  It shows how to apply a quadratic end tangential traction to the end of a beam.  This command will compuyte the nodal forces to be applied to your mesh.

You do not need to apologize for your English, your question was very clear