Programming

FEAP is designed to allow users to modify the code for their owm purposes. If at all possible, users should always use the user hooks provided in the user directory. These allow users to make custom elements, material models, new FEAP commands, et cetera. The programmers manual provides an introduction to programming in FEAP.

To use the user hooks, it is recommended to make a copy of the relevant stub file in a separate project directory. Then add the full path name to this edited copy to main/makefile on the OBJECTS line so that it will be built into FEAP the next time you compile it. If you are using windows, add the copy to your executable project. Even though there is a version of the stub file in your FEAP archive file, the compiler should use your edited copy instead of the one in the archive.

It is also recommended that you obtain a good Fortran reference book, e.g. Modern Fortran Explained by Metcalf, Reid, and Cohen.

Programmers Manual

The programmers manual can be found on the FEAP project site http://projects.ce.berkeley.edu/feap.

User Materials

The method to implement a user material model in FEAP has been described in Section 4.2 of FEAP Programmer Manual. Here we would like to clarify a few things in the user material model with history variables.

The time-dependent history variables

The time-dependent variables are meant to be used for quantities that change in "TIME". That is if you have a solution that advances from time $t_{n}$ to $t_{n+1}$ the history variables for $t_{n}$ are stored in hr(nh1) and those for $t_{n+1}$ are stored in hr(nh2). These can be state variables in incremental stress-strain relations. In your solution algorithm, you must use the solution commands TIME and DT. The structure of your user material model should look like this:

1. In your umati*.f routine, set n1 equals the number of history variabales per Gauss point.

2. In your umodelf.f or umatl*.f subroutine, read the history variables from the previous globally converged time step $t_{n}$ from hn(*)

3. Compute new values of history variables

4. Write your newly computed history values to h1(*) for next time step $t_{n+1}$. Do not write to hn(*)!

After that, FEAP will carry out a global Newton iteration.  If the global Newton iteration is not converged, then the values you wrote to h1(*) will be discarded and your routine will be called again. You will repeat again from step 2 until it is converged. Then, the values in h1(*) will be copied over into hn(*) for use in the next time step when you execute the next TIME command.

The time-independent history variables

If the history variable does not depend in time then we consider them to be independent of "TIME", so you could use the time-independent history variables as it only stores one copy of each value instead of two in the previous case. This type of history variable is more like a status variable depending on deformation. Here is the procedure to implement such kind of history variables,

1. In your umati*.f routine, set n3 equals the number of history variables per element.

2. In your umodelf.f or umatl*.f subroutine, read the history variables from the previous globally converged time step $t_{n}$ from hr(nh3+i) where i runs from 0 to the number of history variables (per gauss point) minus one and nh3 points to the location of first history variable for the current Gauss point.

3. Compute new values of history variables.

4. Update history variables in hr(*) with the newly computed values if needed.

Initialization of history variables in element or materials routines

The history variables are initialized to zero by default. But if you want to initialize any of the history variables to non-zero values you can do this when ISW .eq. 14. For example, if we have m history variables per gauss point, then you can initialize the time-dependent history variables to 1.0d0 in your umodelf.f or umatl*.f subroutine as follows,

c... INITIALIZE HISTORY VARIABLES
        IF (ISW .EQ. 14) THEN
            do i = 1, m 
                hn(i) = 1.0d0
                h1(i) = 1.0d0  
            end do 
        END IF

For time-independent history variables,

c... INITIALIZE HISTORY VARIABLES
        IF (ISW .EQ. 14) THEN
            do i = 0, (m - 1)
                hr(nh3 + i ) = 1.0d0
            end do 
        END IF

This segment of code will be executed for each Gauss point of each element.

(Note that this page is under development)

Calling MATLAB functions from FEAP

MATLAB functions can be called from FEAP if you have installed the MATLAB Engine (toolbox) when you set up MATLAB on your computer. The basic steps to getting this work are gone over below for a specific use case where I would like to use a MATLAB (*.m) file to compute a material model response for a user material.

The basics steps are as follows. (1) Have MATLAB and the MATLAB Engine installed. (2) Create a user macro that will start the MATLAB engine. This permits communication between the MATLAB data space and FEAP's data space using Unix sockets. (3) Set up your user material routine to send FEAP data to MATLAB to compute the material response and to receive is back from MATLAB. (4) Edit the makefile to allow for the compilation of subroutines with special MATLAB function calls as well as linking of the main program with the MATLAB Engine.

Setup the MATLAB Engine The code to start up the MATLAB Engine will be placed in a user macro. To initialize the MATLAB Engine we just need to call this macro command once at the start of a FEAP run. For concreteness we use umacr6. It is important to save the file using a .F extender instead of .f, so that the compiler will run the preprocessor on it before compiling; this is all tested on a Mac which should be the same as Linux too.

!$Id:$
      subroutine umacr6(lct,ctl)

!      * * F E A P * * A Finite Element Analysis Program

!....  Copyright (c) 1984-2019: Regents of the University of California
!                               All rights reserved

!-----[--.----+----.----+----.-----------------------------------------]
!     Modification log                                Date (dd/mm/year)
!       Original version                                    01/11/2006
!       1. Remove 'prt' from argument list                  09/07/2009
!       2. Add 'uhelpfl' comment option                     19/10/2017
!       3. Add 'help' comment option - replaces 'uhelpfl'   07/01/2019
!       4. Create the ML Engine init macro                  10/16/2019
!-----[--.----+----.----+----.-----------------------------------------]
!      Purpose:  Initialize the MATLAB Engine

!      Inputs:
!         lct       - Command character parameters
!         ctl(3)    - Command numerical parameters

!      Outputs:
!         N.B.  Users are responsible for command actions.  See
!               programmers manual for example.
!-----[--.----+----.----+----.-----------------------------------------]
      implicit  none

#     include "fintrf.h"
#     include "mleng.h"

      include  'iofile.h'
      include  'umac1.h'

      mwPointer engOpen
      integer :: status, engEvalString

      character (len=15) :: lct

      logical       :: pcomp
      real (kind=8) :: ctl(3)

      save

!     Set command word

      if(pcomp(uct,'mac6',4)) then      ! Usual    form
        uct = 'mlen'                    ! Specify 'name'

      elseif(pcomp(lct,'help',4)) then  ! Write help information

        write(*,*) 'COMMAND: MLENgine inits Matlab Engine'

      elseif(urest.eq.1) then           ! Read  restart data

      elseif(urest.eq.2) then           ! Write restart data

      else                              ! Perform user operation

        ep = engOpen('/Applications/MATLAB_R2019a.app/bin/matlab')

        if (ep.eq.0) then
          write(*,*) 'WARNING: Matlab engine failed to initialize'
          call plstop
        endif
        status = engEvalString(ep,'addpath /Users/sg/Feap/ver86/main')
        if (status.ne.0) write(*,*) 'WARNING: Matlab path not set'


      endif

      end subroutine umacr6

User Macro Commands

User Macro to reset element data

Copy one of the umacrXX.f files from the user folder to your working directory. Add the include files

include 'cdat1.h'
include 'pointer.h'
include 'comblk.h'

Set the uct variable to what you would like to name your macro (4 letters). Let's say

  uct = 'resd'

We will call the macro as resd,,ma,dl,dv where ma will correspond to our material number and dl the data location that we will change, and dv the new data value we would like to store. Now after the else place the following code

call resdsub(hr(np(25)),nint(ctl(1)),nint(ctl(2)),ctl(3))

This will pass the location of the element data arrays for all materials and our 3 command line parameters ma,dl,dv to the subroutine resdsub; the first two parameters are passed as nearest integers and the data arrays are at offset np(25) in hr. The subroutine resdsub should look like

subroutine resdsub(d,ma,dl,dv)
implicit none
include 'cdat1.h'
integer       :: ma, dl
real (kind=8) :: d(ndd,*), dv

d(dl,ma) = dv

end

Memory

Basics

FEAP's memory management system utilizes an offset technique. There are two (short arrays) hr( ) of type real*8 and mr( ) of type integer, which are both defined in the common block comblk.h. When FEAP arrays are allocated they are done so using the system malloc. This is either done in the source file unix/memory/cmem.c, if on Linux/MAC, or in the source file windows/memory/setmem.f, if on windows.

For each FEAP array that is allocated the offset to its location in memory in units of real*8 or integer chunks of memory is stored in the array np( ). Thus for the DR array, array number 26, which holds the residual, its first element is equivalent to hr(np(26)). For integer arrays like IE, array number 32, which holds the element assembly information, its first element is equivalent to mr(np(32)). In this way FEAP provides a functionality to access all of its internal arrays through a combined use of the common blocks comblk.h and pointer.h, which contains the np( ) array.

Checksumming FEAP arrays

When chasing memory errors under Linux/MAC there are two utility functions that can be helpful. In particular

  call cmemumark(np(xx),precision,ipr)

computes and stores a checksum of the data associated with array xx (set xx to the number of the array you are interested in, set precision to either 1 for integer arrays or 2 for reals, set ipr to 1 for 8 byte integers and 2 for 4 byte integers). You can then check the integrity of the data relative to this checksum at any other place in the code with

  call cmemucheck(np(xx),precision,ipr,result)

where result is an integer =1 for no change and =0 if the data has changed.

Checksumming FEAP array headers

Each FEAP array when allocated is also given a header block, the integrity of the header data to each FEAP array can be checked with

  call cmemcheck(np(xx),precision,ipr)

GDB is your friend

Sometimes data gets overwriting in strange ways and it is very hard to track down when certain arrays are being corrupted. The very best way to debug such problems is to use GDB (or a similar debugger). Make sure that you have compiled the code with the option to generate symbol tables -g on Linux/MAC systems. Then start the code in the debugger gdb feap , set breakpoints and step/continue to see what is going on.

A really useful feature is to use the watch command to allow the program to stop whenever a particular memory address is changed. Suppose I am interest on when the first element of the residual array DR (array 26) changes. I would do the following

(gdb) break pnewprob_

to first set a break point in pnewprob where DR is allocated.

(gdb) run

to get going. Then when the program stops

(gdb) break +646

to set a break point after the point where DR has been allocated. Alternately your debugger may accept

(gdb) break pnewprob.f:646

Then,

(gdb) run

Then

(gdb) p np(26)
(gdb) p &hr(1)

to get the offset to DR and the memory address of hr(1). Suppose these were 195297 and 0xd1ba60. Now compute the address of the first element of DR as 195297*8 + 0xd1ba60, the multiplier is 8(bytes) since DR is a double precision real array. Note 195297*8 = 1562376 = 0x17d708. Adding to the base address we get 0xe99168. Now set a watch on this memory location and continue. The program will stop whenever this address location is altered.

(gdb) watch *(double *)0xe99168
(gdb) c

See the GDB manual watchpoint section for additional details.

Valgrind is incredible

A second very valuable debugging tool is Valgrind. This amazing tool can track down virtually any memory issue you may have with amazing efficiency. Your code will run quite slow in valgrind, BUT it will help you locate error very fact. Just install from the web site or from your package manager (yum, apt, dnf, port, fink, etc.). To run simply type

valgrind feap

Make sure that you have compiled your code with the symbols, -g.